Home > Moped Brand > Suzuki >

House Brand Moped Pedal Crank Arms -Mustard
House Brand Moped Pedal Crank Arms -Mustard


 
Price: $14.99

Stock Status:(Out of Stock)



Pedal Size*:


Qty:  
Description
 

We know a few things about pedal arms. Once our supply of Vintage OEM crank arms ran out, we decided to have some made up to our specs.

Here they are! Loosely based on an Italian crank arm, these have a good bend out to clear pipes and other add ons.

Fits all moped pedal shafts with a 16mm OD, and all standard 9/16th moped pedals.

These crank arms use a 9mm cotter pin that you can get here.

Finished in a protective powder coat coating.

143mm Long, with a 36mm Bend

When choosing a size from the dropdown, if you are installing new pedals, choose the new 9/16th. If you are reusing your old pedals, choose the Vintage 14mm size. We retap the 9/16th crank arms before shipping, so your new pedals install smoothly.

Things you may need for this
Pedal Arm Pin 9mm
Price: $2.70
Pedal Arm Pin 9mm

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 not a bolt up and go part June 3, 2016
Reviewer: Anthony B from Canyon Country, CA United States  
Had to dremmel off the powder coating where the cotter pins fit in. Otherwise those pins were NOT going to fit. Once i did that, they slid right in. Also, the threading where the pedals screw in are a very tight fit, might want to use a wire brush and get the powder coating out of there too, use plenty of oil... not sure if ill be getting my pedals off of these cranks haha   ALSO, i used these on a pacer italian toptank. I had to cut through some of the crank. They did not clear the engine casing on the right side. theres still enough beef in the crank to not effect its durability, but just keep that in mind!

Was this review helpful to you?