|
|
|
|
|
Honda Hobbit Camino Proma Circuit Exhaust
|
In Stock
|
|
|
Proma power. Fits the Honda Camino, Hobbit, PA 50, and all other Honda moped models with that style engine.
|
|
|
|
|
|
|
|
Moped M6 x 32mm Exhaust Intake Engine Stud
|
In Stock
|
|
|
These 6mm engine studs are for almost all cylinders and kits, and can be used for exhaust and intake studs.
|
|
|
|
|
|
|
|
Puch Stock Exhaust Baffle
|
In Stock
|
|
|
If you don't want an expansion chamber, replace your baffle and breathe some new life back into your Puch Ped. Clogged mufflers are a common cause of diminished power.
This is the unrestricted baffle. So expect a bit more pep.
|
|
|
|
|
|
|
|
Tomos A55 Tecno Bullet Exhaust
|
In Stock
|
|
|
More options for the Tomos A55! Made by Tecno, this just bolts on and go.
You will probably want to grab another exhaust gasket and brass tall nuts.
|
|
|
|
|
|
|
|
Puch estoril Racing Exhaust Carbon baffle
|
In Stock
|
|
|
estoril will make you happy
|
|
|
|
|
|
|
|
Sachs Large Exhaust Head and Chamber Clamp - 28mm
|
In Stock
|
|
|
Rear exhaust clamp for Sachs mopeds. This connects the back chamber to the exhaust header.
|
|
|
|
|
|
|
|
Vespa Ciao City Power Stock Exhaust
|
In Stock
|
|
|
Slightly better than stock replacement exhaust for your Vespa or Piaggio or Kinetic moped.
Made in Europe!
|
|
|
|
|
|
|
|
Puch Tecno Circuit Expansion Exhaust
|
In Stock
|
|
|
Simple, different, and a great performer.Low end monster!
|
|
|
|
|
|
|
|
Puch Tecno Boss Exhaust -Black
|
In Stock
|
|
|
The \"Boss\". Back in Black. The budget performance pipe for Puch mopeds. Perfect style for any setup and a Polini's best friend. You can put it on anything from your stock cylinder, up to a 70cc kit and still see performance gains. This pipe is used to regularly break 60mph, and is called by some the \"Budget Homoet\" It is has a huge header, that really lets your bike breath.
|
|
|
|
|
|
|
|
Tomos A35 Biturbo Exhaust
|
In Stock
|
|
|
A performance pipe classic, this exhaust will bolt up to your Tomos engined moped. The expansion chamber on this pipe gives your basic stock engine some tuning that will give you a top speed boost.
This works on all Tomos based mopeds except the newer Arrow, Revival, and Streetmate. This pipe is also great as a replacement for your old clogged muffler.
Tech Tip: To gain maximum performance, upjet slightly, and or add a larger carburetor or big bore kit.
|
|
|
|
|
|
|
|
Tomos A35 Tecno Boss Exhaust
|
In Stock
|
|
|
Tomos A35 Tecno Boss Exhaust
|
|
|
|
|
|
|
|
Puch Tecno Estoril Moped Exhaust
|
In Stock
|
|
|
One of the first \"exotic\" -read not a Biturbo exhausts to hit the US. This pipe is a classic. Best all around pipe for the money.
Great midrange performance, and clears most pedal. You might have to bend out your arms slightly on some bikes. Totally worth it though.
|
|
|
|
|
|
|
|
Motobecane Doppler ER1 Exhaust
|
In Stock
|
|
|
Doppler Motobecane performance!
The Doppler is one of the most advanced pipes for mopeds out there. It is used on many different bikes outside of Motobecane.
Check out Garage, the worlds largest Moped tuning Database. Here are the builds using the Motobecane Doppler pipe.
|
|
|
|
|
|
|
|
Tomos A3 A35 Tecno Boss Exhaust - Black
|
In Stock
|
|
|
The \"Boss\". Back in Black. The budget performance pipe for Tomos A3 and A35 mopeds. Perfect style for any setup and a tuners best friend. You can put it on anything from your stock cylinder, up to a 70cc kit and still see performance gains. This pipe is used to regularly break 60mph, and is called by some the \"Budget Homoet\" It is has a huge header, that really lets your bike breath.
Made in Portugal.
|
|
|
|
|
|
|
|
Puch Tecno Bullet Exhaust
|
In Stock
|
|
|
Same performance as the Bullet we all know and love, but in a clear coat.
Large header, and a big exhaust port help make this pipe a great all around performance exhaust. This pipe will bolt up to your Puch engined moped. The expansion chamber on this pipe gives your basic stock engine some tuning that will give you a top speed boost. This works on all Puch based mopeds after 1975 except the Puch Magnum.
This pipe is also great as a replacement for your old clogged muffler. To gain maximum performance, upjet slightly, and or add a larger carburetor or big bore kit.
|
|
|
|
|
|
|
|
Puch Tecno Boss Exhaust
|
In Stock
|
|
|
The \"Boss\". Excellent chrome, and excellent performance for Puch mopeds. Perfect style for any setup and a Polini's best friend. You can put it on anything from your stock cylinder, up to a 70cc kit and still see performance gains. This pipe is used to regularly break 60mph, and is called by some the \"Budget Homoet\" It is has a huge header, that really lets your bike breath.
|
|
|
|
|
|
|
|
Puch Jamarcol Exhaust
|
In Stock
|
|
|
Puch Jamarcol exhaust, its street name is the \"Jammy\". The Jammy is a super cheap basic pipe for your entry blasting needs.
For a Maxi you will need a slight bend out of your pedal arms to get this to clear.
|
|
|
|
|
|
|
|
Puch Tecno Stock+ Exhaust
|
In Stock
|
|
|
Stock Puch exhaust, made by Techno. Great for a restoration, or just a little performance gain over stock.
|
|
|
|
|
|
|
|
Motobecane Peugeot Simonini Exhaust Mounting Kit
|
In Stock
|
|
|
Designed to work with Simoni Motobecane, and Peugeot exhausts, this set could also help you work up something custo.
|
|
|
|
|
|
|
|
Tomos A35 A3 Tecno Circuit Exhaust
|
In Stock
|
|
|
Simple, different, and a great performer. Low end monster!
|
|
|
|
|
|
|
|
Tomos A35 Tecno Estoril Exhaust
|
In Stock
|
|
|
One of the first \"exotic\" -read not a Biturbo exhausts to hit the US. This pipe is a classic. Best all around deal for performance and pipes.
Great midrange performance, and clears most pedal. You might have to bend out your arms slightly on some bikes. Totally worth it though.
|
|
|
|
|
|
|
|
Honda Jamarocal Performance Exhaust
|
List Price: $60.00 Price: $53.99
In Stock
|
|
|
Honda Moped Jammy Pipe!
|
|
|
|
|
|
|
|
Puch Biturbo Expansion Exhaust -Silver Tip
|
In Stock
|
|
|
A performance pipe classic, this exhaust will bolt up to your Puch engined moped. The expansion chamber on this pipe gives your basic stock engine some tuning that will give you a top speed boost. This is version is a silver tipped update. This works on all Puch based mopeds after 1975 except the Puch Magnum. This pipe is also great as a replacement for your old clogged muffler. To gain maximum performance, upjet slightly, and or add a larger carburetor or big bore kit. This pipe is designed to work with Puch engines, in E50 and ZA50 models. It will not necessarily mount to your Puch frame perfectly. Some frames will require a little adapting, but nothing more advanced than a metal bracket.
There are ton of builds using this pipe on Garage, the worlds largest tuning database. Go check them out and get inspired here.
|
|
|
|
|
|
|
|
Puch Biturbo Expansion Exhaust
|
In Stock
|
|
|
A performance pipe classic, this exhaust will bolt up to your Puch engined moped. The expansion chamber on this pipe gives your basic stock engine some tuning that will give you a top speed boost. This works on all Puch based mopeds after 1975 except the Puch Magnum. This pipe is also great as a replacement for your old clogged muffler. To gain maximum performance, upjet slightly, and or add a larger carburetor or big bore kit. This pipe is designed to work with Puch engines, in E50 and ZA50 models. It will not necessarily mount to your Puch frame perfectly. Some frames will require a little adapting, but nothing more advanced than a metal bracket.
There are ton of builds using this pipe on Garage, the worlds largest tuning database. Go check them out and get inspired here.
|
|
|
|
|
|
|
|
Honda Better than Stock Exhaust
|
In Stock
|
|
|
This is an unrestricted Honda Pa50, Pa50 II, or Camino stock style exhaust.
Pop this onto your stock bike, and it will be better than when it was new.
|
|
|
|
|
|
|
|
Honda MB5 Proma Exhaust
|
In Stock
|
|
|
We decided we wanted to help out the MB5 racers out there. MB5's are almost mopeds right?
Here it is, an affordable ripping pipe.
Proma power!!
Fits the MB5, MB50, MTX, and the MBX.
|
|
|
|
|
|
|
|
Tomos A35 Bullet Exhaust -Clear
|
In Stock
|
|
|
Large header, and a big exhaust port help make this pipe a great all around performance exhaust. The expansion chamber on this pipe gives your basic stock engine some tuning that will give you a top speed boost. T
This pipe is also great as a replacement for your old clogged muffler. To gain maximum performance, upjet slightly, and or add a larger carburetor or big bore kit.
Clear coated, and excellent construction.
|
|
|
|
|
|
|
|
Puch Tomos Biturbo Repair Kit
|
In Stock
|
|
|
Baffle flew into the road? Use this repair kit to fix it back up brand new.
|
|
|
|
|
|
|
|
Tomos A55 Biturbo Exhaust
|
In Stock
|
|
|
Works on all A55 Tomos mopeds. This is definitely the goto pipe for a brand new Tomos.
Easy to bolt up and performs great.
Here are some great builds on Garage of Tomos Mopeds using the Biturbo. Tomos Builds.
|
|
|
|
|
|
|
|
Sachs Exhaust Header
|
In Stock
|
|
|
Stock.
|
|
|
|
|
|
|
|
Vespa Sito Stock Exhaust
|
In Stock
|
|
|
This is a stock replacement exhaust for the Vespa Ciao.
Made by the folks at Sito, this exhaust alows a bit higher throughput than the stock pipe that your Ciao came stock with.
|
|
|
|
|
|
|
|
Vespa Piaggio Simonini Calibrata Black Carbon Baffle Exhaust
|
In Stock
|
|
|
Simonini race powers for your little Vespa moped. This is the famous Simonini Calibrata exhaust. Bolts right up and clears everything.
Made in Italy. This version features a Black coat and a Black Carbon Fiber baffle.
|
|
|
|
|
|
|
|
Tomos 2 Piece Biturbo Exhaust - Kits Only
|
In Stock
|
|
|
The infamous two-piece Biturbo. This exhaust is for Tomos that are using Puch style cylinder kits with flat exhaust ports. Combined with our curved 15mm manifold, this allows you to use any piston ported kit from a Puch on a Tomos that has a 12mm piston pin. Since it has a removable header, it is commonly used to put an expansion chamber on a bike that has no real performance pipes readily available. I have seen this on Sachs, Motobecane, Morini, and once even a Honda QT50.
Go Wild. Gold is back in style.
Doesn't fit on stock Tomos engines. It is designed for putting Puch speed kits on a Tomos.
|
|
|
|
|
|
|
|
Peugeot Sito Exhaust
|
In Stock
|
|
|
This is a performance plus Sito exhaust. Works as a stock replacement on all Peugeot mopeds.
|
|
|
|
|
|
|
|
Honda NSR Proma Grand Prix Exhaust
|
In Stock
|
|
|
Proma Power for your Honda NSR 50 / 80.
Lets go!
|
|
|
|
|
|
|
|
Peugeot Doppler Exhaust
|
In Stock
|
|
|
Crazy performance for Peugeot 103 104 TSA or TSM. Comes with all the mounting hardware you would need to mount it up.
The standard in French moped pipe performance.
Made by the folks at Doppler
|
|
|
|
|
|
|
|
Jamarocal Expansion Pipe
|
In Stock
|
|
|
Right side slip on Jammy pipe. Minarelli, Garelli, Tomos and others could just slip on this vintage chamber. Great patina on the sticker.
Made in Portugal.
|
|
|
|
|
|
|
|
Puch Jamarcol Exhaust chamber ONLY
|
In Stock
|
|
|
Puch Jamarcol exhaust, its street name is the \"Jammy\". The Jammy is a super cheap basic pipe for your entry blasting needs. This one has a removable baffle, so you can slide this chamber onto a bunch of different headers. IE Minarelli, Batavus, Morini, Derbi, Tomos, and basically any bike you want to fasion a cheap chamber for.
For a Maxi you will need a slight bend out of your pedal arms to get this to clear.
|
|
|
|
|
|
|
|
Vespa Tecno Circuit Exhaust
|
In Stock
|
|
|
Great lowend, midrange, and overall performance. This has amazing power throughout.
|
|
|
|
|
|
|
|
Sachs Malossi Race Header
|
In Stock
|
|
|
Sachs performance header for all Sachs 504, 505 engines. Great for putting a better exhaust on your ped.
|
|
|
|
|
|
|
|
Vespa Piaggio Simonini Calibrata Carbon Baffle Exhaust
|
In Stock
|
|
|
Simonini race powers for your little Vespa moped. This is the famous Simonini Calibrata exhaust. Bolts right up and clears everything.
Made in Italy. This version features a clear coat and a Carbon Fiber baffle.
|
|
|
|
|
|
|
|
Puch House Brand Circuit Exhaust
|
In Stock
|
|
|
All the ripping low end of your Proma or Technigas underbody exhaust now availble in a brand new 77 exclusive pipe.
Fits all you Maxi Magnum Freespirit Puch riders.
*On the circuit exhausts remember to tighten down the baffle or you may lose it.
You may want to add a couple tack welds for insurance.
|
|
|
|
|
|
|
|
Puch Proma Circuit Exhaust
|
In Stock
|
|
|
Great lowend, midrange, and overall performance. This has amazing power throughout.
|
|
|
|
|
|
|
|
Vespa Polini Country Exhaust -Mystery Edition
|
In Stock
|
|
|
This is not the usual Polini Country Exhaust. Super old stock, it doesn't even show up in the Polini parts list.
Fits a Vespa of some kind. Solve the Mystery!
|
|
|
|
|
|
|
|
Puch Proma GP (Clear Coat)
|
In Stock
|
|
|
Technigas!!!
|
|
|
|
|
|
|
|
Puch Proma GP
|
In Stock
|
|
|
Puch Proma GP
|
|
|
|
|
|
|
|
Peugeot 103 Stock Exhaust -Leovince
|
In Stock
|
|
|
Better than stock Peugeot 103 exhaust. Threaded for American cylinders.
Made by the good folks at LeoVince.
|
|
|
|
|
|
|
|
Vespa Polini Mod SP Exhaust
|
In Stock
|
|
|
This is a serious exhaust for a serious tuned setup. The massive expansion chamber offers a huge amount of scavenging for overbore kits and high end power. Its the best exhaust that polini makes for Vespa mopeds.
|
|
|
|
|
|
|
|
Stock Peugeot Exhaust
|
In Stock
|
|
|
Has shelf wear. Make sure the mounting style is the same as what you need. This mounts with studs, and not a threaded coupler.
|
|
|
|
|
|
|
|
Peugeot Stock Exhaust
|
In Stock
|
|
|
Oem, and with a slight bit of shelf wear. Perfect for a restoration.
|
|
|