Home > Moped Parts > Hardware > Nuts
Sort By:
Page of 1
Motobecane Flywheel Nut - Left Hand Thread
Motobecane Flywheel Nut - Left Hand Thread
Price: $7.55
In Stock

Make sure you know which nut you need.  This nut is typically for stock bikes.  But, mopeds are tricky so check first.  Or order both and see which works for you.

M11 x 1mm pitch reverse threaded

more info
6mm Everything Locking Nut
6mm Everything Locking Nut
Price: $0.27
In Stock

This is the most common nut found on your moped. It is called 6mm, or M6 in Metric speak. If you have a 10mm wrench or socket, and it fits the nut you need, this is it. This is the locking version of the common 6mm nut.

Used on exhaust studs, head bolts, and everywhere else.

Quantity discounts after 5. Keep adding them to your cart and watch the prices fall.

more info
Puch Tomos Honda EBR Fork Nut
Puch Tomos Honda EBR Fork Nut
Price: $7.55
In Stock

Standard nut that fits Puch, Tomos, Honda Hobbit and EBR forks. more info
M4 Nut
M4 Nut
Price: $0.11
In Stock

M4 nut. Goes anywhere you need one. more info
Puch Sachs Peugeot Derbi Flywheel Nut
Puch Sachs Peugeot Derbi Flywheel Nut
Price: $5.39
In Stock

Basically a universal flywheel nut. If your nut has a flange on it, maybe use a washer with this one.

Fits, Batavus, Peugeot, Sachs, Puch, Tomos, and many others. Measure the OD of the threaded part of your crank to verify.

more info
NOS Puch Flywheel / Clutch Nut
NOS Puch Flywheel / Clutch Nut
Price: $8.63
In Stock

Nut with built in washer for holding on your flywheel. Also works for holding on your clutch.

Will work with many other brands for their flywheels as well.

more info
M11 11mm Axle Nut
M11 11mm Axle Nut
Price: $2.15
In Stock

Axle nut.  

Fits anywhere else you might need a 10mm nut as well.

 

11mm x 1mm Thread

more info
Puch Tomos EBR Triple Tree Nut
Puch Tomos EBR Triple Tree Nut
Price: $4.99
In Stock

Triple Tree Nut.

Works with EBR forks, Puch, and Tomos forks.
more info
M6 Tall Coupler Head Nut
M6 Tall Coupler Head Nut
Price: $2.50
In Stock

These are really tall 6mm nuts, great for using as a coupling nut, or they work well as a head, exhaust, or intake nut.

Sold Individually.
more info
Franco Morini M8 Ignition Magneto Nut
Franco Morini M8 Ignition Magneto Nut
Price: $9.99
In Stock

Franco Morini ignition nut.

M8 x 15mm
more info
Locking M7 Nuts
Locking M7 Nuts
Price: $0.43
In Stock

These nuts are oblong on the end. A neat oem trick to make them lock nuts. Works great has head nuts.

Sold individually.
more info
Minarelli Clutch Nut -Reverse Thread
Minarelli Clutch Nut -Reverse Thread
Price: $10.79
In Stock

Minarelli clutch nut, reverse threaded.

more info
M7 Nut
M7 Nut
Price: $0.18
In Stock

m7 nuts. perfect for tomos cylinder studs and more!

Sold individually.
more info
SINGLE Brass Tall Exhaust Nut
SINGLE Brass Tall Exhaust Nut
Price: $2.15
In Stock

Perfect for installing a performance exhaust, because they are taller and softer than steel nuts.

Sold as a pair.
more info
6mmLong Brass Exhaust Nut
6mmLong Brass Exhaust Nut
Price: $2.99
In Stock

Long brass exhaust nuts for m6 exhaust studs. If you have a moped with m6 exhaust studs, then these are for you. Get those old stripped m6 nuts off of there and shine up your old moped with these new brass nuts.

These are sold individually, so if you need two buy two.

more info
25.5mm Fork Nut for Garelli, Vespa Bravo, Vespa Ciao, Honda Hobbit & more
25.5mm Fork Nut for Garelli, Vespa Bravo, Vespa Ciao, Honda Hobbit & more
Price: $6.99
In Stock

Top fork nut for Garelli, Vespa Bravo/Ciao, Honda Hobbit, General, Lazer, Batavus, Trac, & Cimatti. These all have 25.5mm threading. more info
Malossi M7 Head Nut Kit
Malossi M7 Head Nut Kit
Price: $14.03
In Stock

Super convenient head nut pack.  It will work wherever you need M7 nuts. Common M7 head nut using mopeds are: Derbi, Tomos, Motobecane, Vespa, and Kinetic.

Made in Italy!
more info
Cable Adjuster with Nut
Cable Adjuster with Nut
Price: $2.70
In Stock

Cable adjuster with nut. 

 

For use with any cable up to 7mm in diameter

 

m6 x 25mm

more info
Motobecane Flywheel Nut - Right Hand Thread
Motobecane Flywheel Nut - Right Hand Thread
Price: $7.55
In Stock

Make sure you know which nut you need.

Nut typically found on aftermarket cranks, but still possibly the nut that came on your stock crank. Check if you have a regular thread or reverse thread.

M11 x 1mm Thread

more info
Tomos Oil Pump Nut
Tomos Oil Pump Nut
Price: $12.96
In Stock

This is a magneto nut that also has a slot for your oil pump. OEM Tomos parts! more info
Peugeot Polini Flywheel Nut
Peugeot Polini Flywheel Nut
Price: $9.71
In Stock

This nut is great for fitting in those deep variators. more info
Motobecane Variator Nut
Motobecane Variator Nut
Price: $5.39
(Out of Stock)

The nut that holds on your Motobecane Variator. more info
M10 10mm Axle Nut
M10 10mm Axle Nut
Price: $1.99
(Out of Stock)

Axle nut.  It is a 10mm nut, but fits the 12mm Tomos Axle. 

 

Fits anywhere else you might need a 10mm nut as well.

 

10mm x 1mm Thread

more info
OEM Minarelli Flywheel Nut
OEM Minarelli Flywheel Nut
Price: $10.79
(Out of Stock)

New Old Stock Minarelli V1 or VL1 flywheel nut. more info
Brass Tall Exhaust Nuts
Brass Tall Exhaust Nuts
Price: $3.99

Perfect for installing a performance exhaust, because they are taller and softer than steel nuts.

Sold as a pair.
more info
metric flat washers
metric flat washers
Price: $0.25

metric flat washer by the piece

more info
any metric nut
any metric nut
Price: $0.25

any metric nut you need. more info