Home > Moped Brand > Puch >

Puch E50 3 Shoe Superclutch
Puch E50 3 Shoe Superclutch

Alternative Views:

Price: $88.00

Stock Status:(Out of Stock)


After no further ado, we present the 77 Superclutch. We designed and made this clutch to handle the extreme punishment that your tuned E50 engine dishes out.

Be sure to locktite the bolts that hold your shoes in place. We recommend running Transoil to keep this clutch a little cooler.

Unlike the traditional Puch 3-shoe, there is really no need to tune this clutch. Drop it in and go..... However if you want to, tunablity of this clutch is limited only by your imagination. You can insert more washers in between the bolt and the spring to preload the existing spring. You can also insert lighter springs. The springs on this clutch are a tad too strong when you first install the clutch, but break in to the perfect strength.

Some folks are having issues where the bolts back out. We found that a good remedy to this is this little bolt kit here.

Includes everything you see here.

3-Shoe Clutch!!!

2021 update!
We found one last one of these that appears to have been soaked in Transoil, but not run. Get this piece of history while you still can!

Things you may need for this
Puch Minarelli House Brand Clutch Puller
Price: $14.99
Puch Minarelli House Brand Clutch Puller

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 5 star to equal out the 1 star August 18, 2017
Reviewer: Chris DeLancett from palm harbor, FL United States  
I never got thee clutch, but, Finally got response on the clutch that didn't ship, got a full refund, and they included the 2 full sets of Puch e50 cables in the refund amount. I have used the cables and they are perfect fit for my matching pair of 1978 JC Penney Swinger 2 mopeds, and my 1978 Sears Free Spirit. Thanks Guys, gonna supe up the Free  Spirit 1hp

Was this review helpful to you?

  1 of 1 people found the following review helpful:
5 of 5 excellent torque June 22, 2016
Reviewer: Anonymous Person from fort lauderdale, FL United States  
grips great must use locktight  clean before locking  put screws in till it tiouches hub then 1 turn in to 1 and a half

Was this review helpful to you?