|
|
|
|
|
|
Puch Maxi Double Seat
|
|
|
This seat will go on most mopeds, but says Puch right on it. Replace that crappy one person seat with something roomier, comfortable, and more stylish.
Dimensions: 18in long X 7in wide
Style Tip: The screenprinted Puch logo comes right off with mineral spirits.
|
|
|
|
|
|
|
|
|
|
Swarm and Destroy Billet Pedal Crank Arms
|
|
|
These crank arms go all the way back to 2006 or so.
By popular demand we are re-releasing them. Machined out of billet aluminum and then anodized a hard black coating. The design has been slightly updated to clear Puch ZA50 cases, and clears more pipes than the old version.
Fits all standard 9/6th pedals, and 9mm cotter pins.
*Tattoos not required!
|
|
|
|
|
|
|
|
|
|
Honda Hobbit Camino Express CDI Ignition System
|
|
|
Finally a cheap and ripping CDI unit for the Honda Hobbit, Camino, PA 50, PA50 II, and FA50.
This CDI setup puts out massive amount of ignition power and lighting power. Bright, bright lights, and throws a strong bright blue spark, allowing you to open your gap up a bit for a larger flame kernel.
Wires from the stator are bullet connector ready and plug right into many boxes out there like the coveted Yamaha Jog box, and the flywheel works perfectly with the stock points cam too! The Jantel box that ships with this has a 5-pin connector you need to put some wires on, but it has a nice retarding 2-stroke timing curve!
12V system
|
|
|
|
|
|
|
|
|
|
Moped Life Hat
|
|
|
One size fits all!
|
|
|
|
|
|
|
|
|
|
Peugeot 103 104 105 Doppler Belt
|
|
|
high quality fiber reinforced performance doppler belt for your Peugeot 103 104 or 105.
|
|
|
|
|
|
|
|
|
|
12v 55w H3 Halogen Conversion Beam
|
|
|
Bright Modern Lights!
|
|
|
|
|
|
|
|
|
|
Motul 800 4 Liter Jug!
|
|
|
The best 2 stroke oil on the market. This is the oil to take to the race track.
Ester Synthetic base stock has been specially formulated for very high performance 2-stroke engines. Provides up to five times more film strength than petroleum oils and up to four times more than synthetic blends. Handles very high temperatures and burns so CLEAN that POWER VALVE and EXHAUST deposits are all but eliminated
This is a premix oil only, do not use in an autolube Ped.
4 Liter Jug!
|
|
|
|
|
|
|
|
|
|
ROCK OIL Strawberry Scented Two Stroke Oil
|
|
|
When you run this stuff, your exhaust fumes smell like strawberries! In fact, the warehouse smells like strawberries right now as well.
|
|
|
|
|
|
|
|
|
|
Puch E50 Stainless Bolt Kit
|
|
|
Complete stainless steel bolt kit for all E50's. A great replacement for
your almost stripped bolts and makes it easier for cracking engines for
the true moped mechanic.
comes with:
x8 - 30mm M6 allen bolts
x5 - 50mm M6 allen bolts
x4 - 20mm M6 allen bolts for your clutch cover.
|
|
|
|
|
|
|
|
|
|
Moped Factory Peugeot on Sachs Exhaust Bracket
|
|
|
A handy little bracket that allows you to mount a Peugeot underbelly exhaust on your Sachs moped. This opens up a bunch nice options to you Sachy Sachs tuners.
Fits 505 like a breeze. No reports on 504 yet.
Made in the USA by Moped Factory
|
|
|
|
|
|
|
|
|
|
NOS Puch Flywheel / Clutch Nut
|
|
|
Nut with built in washer for holding on your flywheel. Also works for holding on your clutch.
Will work with many other brands for their flywheels as well.
|
|
|
|
|
|
|
|
|
|
Moped Life Hat -Camo!
|
|
|
One size fits all!
|
|
|
|
|
|
|
|
|
|
Moped Life Hat - Foam
|
|
|
One size fits all!
|
|
|
|
|
|
|
|
|
|
House Brand Minarelli V1 Fan -108 Version
|
|
|
We had the Fantic Motor Minarelli fan remade for us. It is injected molded, and much much stronger than the cast, or 3d printed fans running around out there. It is slightly higher taller than other 108 fans, but you can sand down the edges to get it to drop down where you need it.
Check to see which version you need. It will be either the 103, or the 108. More versions are in the works!
|
|
|
|
|
|
|
|
|
|
Minarelli V1 V1L Stock Clutch Shell
|
|
|
This is the clutch shell sans shoes for a Minarelli V1 or V1L. Fits taper clutch style cranks.
NOS made by Minarelli
|
|
|
|
|
|
|
|
|
|
NOS Minarelli V1 V1L Stock Start Clutch Plate
|
|
|
Stock Start Clutch Plate for all your V1s and V1Ls
|
|
|
|
|
|
|
|
|
|
Heidenau K36 Moped Tire - 16 x 2.5in
|
|
|
Great German tire company, making great tires for mopeds. Made in Germany, these are an all around well balanced tire. Sticky for the road with a vintage tread that helps keep your rubber side down.
These are a bit wide, so make sure your swing arm can accommodate it before you order.
|
|
|
|
|
|
|
|
|
|
Puch Pedal Chain Tension Arm
|
|
|
Replacement pedal chain tensioner for Puch mopeds. This is a high quality aftermarket replacement for the part that seems to always break on older Puch mopeds.
|
|
|
|
|
|
|
|
|
|
Buzzetti Timing Tool
|
|
|
Professional moped tuners agree, this tool is the bomb.
|
|
|
|
|
|
|
|
|
|
Puch Peugeot Lelue Front Hub
|
|
|
Complete front hub for any bike that has a Lelue 36 hole front wheel.
Sealed bearing set up.
|
|
|
|
|
|
|
|
|
|
Motobecane Condenser
|
|
|
Motobecane condenser, internal variety.
|
|
|
|
|
|
|
|
|
|
Puch E50 Full Rebuild Crankshaft Bearing and Seal Set
|
|
|
Easy Peasy Puch E50 Rebuild Set.
|
|
|
|
|
|
|
|
|
|
Puch Magnum MLM BK100 Exhaust -Angled Exhaust Port
|
|
|
Quality, Quality, Quality! This pipe is meticulously hand made, and adds a ridiculous power boost to your Puch Magnum, JC Penney, Free Spirit. Clears the pedals.
The BK100 is a huge chamber 100mm around at the widest. Known as the Big Kahuna, the bottom end and midrange are incredible. Designed to work with a Puch Gilardoni or Metrakit.
Each pipe has a hand applied Motion Left Mopeds decal, hand picked for each pipe by Devin himself!
Made by hand in Indiana by Motion Left Mopeds.
*This is the exhaust that Devin won the Thunderdrome with.
|
|
|
|
|
|
|
|
|
|
Peugeot 103 Crate Engine
|
|
|
Complete and brand new Peugeot Engine. Drop it in and go. Includes everything you see and need other than a CDI box, and carburetor.
These are OEM engines found on newer Peugeot style mopeds. Why rebuild that 103 engine you have?
The intake on this is a 19mm OD, so make sure the shim on your SHA is correct.
|
|
|
|
|
|
|
|
|
|
MLM Suzuki FA50 18mm Intake
|
|
|
Bolt on up an 18mm Mikuni to your Suzuki FA50. If you prefer Dellorto, you can hook on up with a rubber coupler.
Exquisite craftsmanship, by hand, and then finished with an indestructible Electrocoat.
Made by the good folks at Motion Left Mopeds in Indiana.
|
|
|
|
|
|
|
|
|
|
Suzuki FA50 MLM People's Pipe
|
|
|
Finally the Suzuki FA50 NoPed gets the same love as its pedal having brethren. MLM offers a side bleed version of the rock solid People's pipe. Side bleed gives you superior performance and is quieter then the traditional exhaust.
The Peoples Pipe is an American hand made exhaust at an affordable price. Created out of hand formed cones, perfectly welded and then finished in a luxurious high temp powdercoat.
This pipe also features a very easily re-packable canister, so when the time comes, you can easily rebuild it.
Made in the USA by the pipe masters Motion Left Mopeds.
|
|
|
|
|
|
|
|
|
|
MLM Batavus Laura M48 15mm Intake
|
|
|
The missing part to put a new carburetor on your Batavus Moped.
|
|
|
|
