Unrestricted 5-pin CDI box that ships with the Honda CDI but will also work on a couple other CDIs, including the Motobecane stock CDI. While it uses a 5-pin connector, you can easily splice a male connector onto your current stator wires.

The wiring when looking into the connector is as follows:

[1-2-3]

[4-5-6]

• 1 - timing input, pink from the stator
• 2 - empty
• 3 - is power out to the HT ignition coil, usually black
• 4 - ground
• 5 - kill switch (grounds to kill engine)
• 6 - power input from the stator, black wire from the stator