Home > Moped Parts > Engine > Reed Valves
Sort By:
Page of 1
Peugeot Puch Polini Reed
Peugeot Puch Polini Reed
Price: $23.00
In Stock

This reed fits Puch Polini kits and stock Peugeot cases.
Puch Cylinder Stud
Puch Cylinder Stud
Price: $2.99
In Stock

Sold Individually.
Peugeot Tomos Puch House Brand Race Reed Block
Peugeot Tomos Puch House Brand Race Reed Block
Price: $14.99
In Stock

Drop in performance reed for Peugeot, Tomos and Puch Polini or Parlini kits.

Peugeot Tomos Puch Polini Athena Carbon Fiber Reed
Peugeot Tomos Puch Polini Athena Carbon Fiber Reed
Price: $25.99
In Stock

A simple upgrade for your Peugeot, Tomos, or Reed kitted Puch.
Honda Hobbitt Boyesen Reed
Honda Hobbitt Boyesen Reed
Price: $19.00
In Stock

Performance Reed for Kitted Honda Hobbitt, Camino, PA50, PA50 II mopeds. Direct replacement, that gives you quite a punch. This reed is a Dual Stage reed that is designed to work with either modified cylinder, or bigger displacement kits.

Since it has two reeds, it is tuned for both torquey low-end, and great throttle response through the top.

Reeds:

Outer Top Reed = 0.6mm
Inner Split Reed = 0.3mm

Made out of Fiberglass.

Also works on a bunch of other non-moped 50cc bikes: Beta Tempo 50, Piaggio, Yamaha Axis, and Yamaha Jog 50.


Puch Athena / Honda MB5 Reed
Puch Athena / Honda MB5 Reed
Price: $35.99
In Stock

Honda MB5 or Puch Athena replacement reed.
Honda MB5 / Puch Athena / AJH / 77 Reed Block -Carbon Fiber
Honda MB5 / Puch Athena / AJH / 77 Reed Block -Carbon Fiber
Price: $35.00
In Stock

Performance Carbon fiber reed block for all Honda MB5 motorcycles.

Also fits the Puch Athena/AJH/77 70cc Reed kit.

Real Carbon Fiber!
Peugeot 103 Moped Stock Reed Valve and Gasket
Peugeot 103 Moped Stock Reed Valve and Gasket
Price: $9.99
In Stock

Basic stock reed valve for Peugeot 103, 104, TSA, and TSM moped. Also fits Tomos, Trac and Puch Polini and Parlini kits.
Polini Carbon Reed Paper .25mm
Polini Carbon Reed Paper .25mm
Price: $27.28
In Stock

Custom Reed Paper!
110mm x 110mm
AV10 Reed Valve -Stock
AV10 Reed Valve -Stock
Price: $20.00
In Stock

Stock AV10 Reed Valve
Polini Carbon Reed Paper -.45mm
Polini Carbon Reed Paper -.45mm
Price: $40.00
In Stock

Make your own reeds.
Minarelli V1L Morini M1 Polini Reed
Minarelli V1L Morini M1 Polini Reed
Price: $39.00
In Stock

Minarelli V1L and Morini M1 motors both can take advantage of this reed block.
Puch Gilardoni Reed Block
Puch Gilardoni Reed Block
Price: $29.99
In Stock

In case you lost yours. This is the stock reed block that comes with the Puch Gilardoni kit.
Puch Athena / Honda MB5 Riser Plate
Puch Athena / Honda MB5 Riser Plate
Price: $10.99
In Stock

The basic building block for getting creative with reeds. This is an Athena Reed riser, and with some pretty simple shaving mods, allow you to put Gilardoni style reed blocks where you shouldn't. Also bolts right up to a Honda MB5

Have fun!
Motobecane Peugeot Polini Reed Block
Motobecane Peugeot Polini Reed Block
Price: $29.99
In Stock

Replacement reed for the Polini Motobecane, and Peugeot performance cases.
Polini Carbon Reed Paper .40mm
Polini Carbon Reed Paper .40mm
Price: $27.70
In Stock

110mm x 110mm
Vforce V3 MotoTassinari Honda Dio Trickmetric Reed Block
Vforce V3 MotoTassinari Honda Dio Trickmetric Reed Block
Price: $150.00
In Stock

Drop this in your Honda Dio, or use it with a Trickmetric Adapter on your Honda Camino. Absolute blaster reeds; significant improvements in torque and overall flow.


Motobecane AV10 Athena Carbon Fiber Reed
Motobecane AV10 Athena Carbon Fiber Reed
Price: $27.99
In Stock

Drop some carbon fiber reedage into your AV10 motor.

0.3m thick reeds

Puch Gilardoni Malossi Reed Block
Puch Gilardoni Malossi Reed Block
Price: $45.99
In Stock

Juice up your Puch Gilardoni, or Derbi 4 Petal with this Malossi made deluxe reed block.

Made in Italy
Vforce V3 MotoTassinari Puch Gilardoni Reed Block
Vforce V3 MotoTassinari Puch Gilardoni Reed Block
Price: $155.00
In Stock

Drop this in your Puch Gilardoni, or your Flat reed Derbi Italkit 4 Petal intake. Absolute blaster reeds; significant improvements in torque and overall flow.

Actually works with any reed block like the Puch Gila, like the Derbi GPR and Senda, all minarelli AM6 engines, RS50, and Chappy.
Gain 1 HP.

So amazing. 8 Petal power house.

Made in the USA!

Polini 4 Petal Upgrade Reed -Rubberized
Polini 4 Petal Upgrade Reed -Rubberized
Price: $64.99
In Stock

Rubberized true 4 petal reed block. This drops into all the most popular Polini moped parts. Upgrade your budget Peugeot Race case and the 4 petal upgrade intakes.

Upgrade! Upgrade!
Peugeot Tomos Puch Malossi VL1 Carbon Fiber Reed Block
Peugeot Tomos Puch Malossi VL1 Carbon Fiber Reed Block
Price: $26.00
In Stock

Malossi drop in reed block for your Tomos A35, Peugeot 103, Parlini, or  Puch Polini. 

Racer! .3mm thick carbon fiber reed.

Made in Italy!
Puch Athena Gilardoni Style Reed Block
Puch Athena Gilardoni Style Reed Block
Price: $45.99
In Stock

Fits many different applications, but most commonly used as on the Puch Gilardoni. This is a fancy reed made by Athena.
Honda Performance Reed Block
Honda Performance Reed Block
Price: $24.99
(Out of Stock)

A little upgrade over your stock reed. Fits on all the usual suspects. Honda PA50, PA50 II, Express, Hobbit, Camino, and some others.
Puch Polini Gilardoni-Style Reed Block
Puch Polini Gilardoni-Style Reed Block
Price: $65.00
(Out of Stock)

Puch Gilardoni upgrade Reed. Also works on the Italkit Derbi 4 Petal intakes.
Motobecane AV10 Malossi Race Reeds
Motobecane AV10 Malossi Race Reeds
Price: $19.99
(Out of Stock)

Malossi race reeds for your AV10 Motobecane.  Comes with 2 Sets.  .3mm, and .35mm carbon fiber reads.

Installs on your oem reed block.

Made in Italy!
Derbi TJT Race Reeds
Derbi TJT Race Reeds
Price: $15.00
(Out of Stock)

Replacement Carbon fiber reeds for your Derbi Flat Reed moped.

Made in Spain!
Peugeot Tomos Puch House Brand Race Reed Block
Peugeot Tomos Puch House Brand Race Reed Block
Price: $16.99

Drop in performance reed for Peugeot, Tomos and Puch Polini or Parlini kits.

Much better than stock. Easy to install, and includes two gaskets.

*Please be sure to take the screws out before installing, and put a drop of loctite on the threads and then reinstall them. This makes sure that they don't come loose and ruin your day. Also, please make sure you check the clearance of the screws that hold the reeds in place. Different intakes have different cutouts so you might need to grind the screws down a bit.