|
|
|
|
|
|
Indigan Double Bolt Clip-on Bar - 33mm Black Edition
|
In Stock
|
|
|
Indigan presents the pinnacle of moped clip-on bars. These are handmade of mild steel. Powdercoated in a luxurious protective coating. These things will last for ever.
This model features the half dome end cap, and two stainless steel bolts for extra lock down.
Clamps on 33mm fork tubes. Measure your fork tube first.
|
|
|
|
|
|
|
|
|
|
Moped M Bar Handlebar -The Mini Clubman
|
|
In Stock
|
|
|
These bars are the scale you need for that beloved little motor bike. Great scale and a good finish make these black bars fit any build.
|
|
|
|
|
|
|
|
|
|
Moped M Bar Handlebar -The Mini Clubman - Chrome
|
|
In Stock
|
|
|
These bars are the scale you need for that beloved little motor bike. Great scale and a good finish make these chrome bars fit any build.
|
|
|
|
|
|
|
|
|
|
Ye Ol Plow Handlebar
|
|
In Stock
|
|
|
Ye Ol Plow Bars. Back by popular demand! Originally invented by a dutch farm boy, so that he could get thru his rows of corn.
Impress your friends.
| Diameter | 7/8th\" | 22mm | | Width | 18.5\" | 47cm | | Rise | 9.75\" | 24.75cm | | Pullback | 8\" | 20.25cm | | Center | 7.5\" | 19cm |
|
|
|
|
|
|
|
|
|
|
moped chopper handlebar - chrome
|
|
In Stock
|
|
|
You've got a fat rear tire and some magnum length forks. All you need now is a set of chopper bars to go with your chopper moped.
Similar to the Ye Olde Plow Bars only taller and narrower. Extra beefy with a middle brace, and chrome as the sun is bright.
It's not a moped, baby; it's a chopper.
|
|
|
|
|
|
|
|
|
|
Moped Motocross Handle Bar
|
|
In Stock
|
|
|
Small moped scale motocross Handlebars. Original OEM equipment on a Motomarina dual use bike, they are the perfect size for tearing around your city, the track or the desert.
|
|
|
|
|
|
|
|
|
|
Bikemaster European Low Rise Chrome Handlebar
|
|
In Stock
|
|
|
These are replacement handlebars to turn your moped into a hot sport race ped. They will bolt right up on your triple tree just like your old handlebars, but give you that slightly lower than stock stance. Mount them up, and for an even more custom feel, trim them up with a pipe cutter. You can use all your old cables and controls.
| Diameter |
7/8th\" |
22mm |
| Width |
30\" |
76.2cm |
| Rise |
2.4\" |
6cm |
| Pullback |
4.8\" |
12cm |
| Center |
4.8\" |
12cm |
These handlebars will work on Puch, Tomos, Motobecane, Vespa Mopeds, Garelli, Cimatti, Sachs, and most other brands not listed.
|
|
|
|
|
|
|
|
|
|
Fly Racing Anti Vibration Bar Ends -Black
|
|
In Stock
|
|
|
This set of bar ends are designed to take the vibration off of your hands, and push it out to the end of your handle bars.
They also look great!
|
|
|
|
|
|
|
|
|
|
Low Rise Moped Handlbar
|
|
In Stock
|
|
|
These bars come a little dusty and dirty. The ones in the picture took just about 5 minutes of cleanup, but they looked ancient when we started.
| Diameter | 7/8th\" | 22mm | | Width | 24\" | 61cm | | Rise | 5\" | 12.7cm | | Pullback | 3.5\" | 64mm | | Center | 4\" | 10cm |
The stance on these are great though. They will go well on pretty much any bike you want to put them on.
|
|
|
|
|
|
|
|
|
|
Bikemaster Drag Bar -Black
|
|
(Out of Stock)
|
|
|
Powdercoated black, with the throttle side bar left raw for easy installation.
| Diameter | 7/8th\" | 22mm | | Width | 28\" | 71cm | | Rise | -0.8\" | -.02cm | | Pullback | 6\" | 15.25cm | | Center | 4.8\" | 12cm |
|
|
|
|
|
|
|
|
|
|
Moped Stock Handlebars
|
|
(Out of Stock)
|
|
|
Super stock bars. Chrome and brand new. About what you expect from stock bars.
| Diameter | 7/8th\" | 22mm | | Width | 25.25\" | 64cm | | Rise | 9.5\" | 24cm | | Pullback | 4.75\" | 12cm | | Center | 5.25\" | 13.25cm |
|
|
|
|
|
|
|
|
|
|
Bike Master Drag Bars -Chrome
|
|
(Out of Stock)
|
|
|
| Diameter | 7/8th\" | 22mm | | Width | 28\" | 71cm | | Rise | 3.84\" | 9.75cm | | Pullback | 0\" | 0cm | | Center | 5.6\" | 14.25cm |
Trim to fit.
|
|
|
|
|
|
|
|
|
|
Fly Racing Mini Motocross Handlebar
|
|
(Out of Stock)
|
|
|
Mini Motocross bars that fit your moped. You will need to cut the ends down a bit, but they are pretty action packed. Made of carbon steel, includes a Fly Racing pad, so you don't hit your noggin.
|
|
|
|
|
|
|
|
|
|
Indigan Double Bolt Clip-on Bar - 30mm Red Edition
|
|
(Out of Stock)
|
|
|
Indigan presents the pinnacle of moped clip-on bars. These are handmade of mild steel. Powdercoated in a luxurious protective coating. These things will last for ever.
This model features the half dome end cap, and two stainless steel bolts for extra lock down.
Clamps on 30mm fork tubes, found on newer hydraulic Tomos, and various other bikes.ï¿_ Measure your fork tube first.
|
|
|
|
|
|
|
|
|
|
Moped W Bar Handlebar
|
|
(Out of Stock)
|
|
|
These bars are the scale you need for that beloved little motor bike. Great scale and a good finish make these chrome bars fit any build.
Kinda like M-Bars, but the shape is a bit more exaggerated.
|
|
|
|
